yum_repository - Add or remove YUM repositories¶

New in version 2.1.

Synopsis
Parameters
Notes
Examples
Return Values
Status
Maintenance
- Support
- Author

Synopsis ¶

Add or remove YUM repositories in RPM-based Linux distributions.
If you wish to update an existing repository definition use ini_file instead.

Parameters ¶

Parameter	Choices/Defaults	Comments
async bool	Choices: no yes ←	If set to `yes` Yum will download packages and metadata from this repo in parallel, if possible.
attributes (added in 2.3)		Attributes the file or directory should have. To get supported flags look at the man page for chattr on the target system. This string should contain the attributes in the same order as the one displayed by lsattr. `=` operator is assumed as default, otherwise `+` or `-` operators need to be included in the string. aliases: attr
bandwidth	Default: 0	Maximum available network bandwidth in bytes/second. Used with the throttle option. If throttle is a percentage and bandwidth is `0` then bandwidth throttling will be disabled. If throttle is expressed as a data rate (bytes/sec) then this option is ignored. Default is `0` (no bandwidth throttling).
baseurl		URL to the directory where the yum repository's 'repodata' directory lives. It can also be a list of multiple URLs. This, the metalink or mirrorlist parameters are required if state is set to `present`.
cost	Default: 1000	Relative cost of accessing this repository. Useful for weighing one repo's packages as greater/less than any other.
deltarpm_metadata_percentage	Default: 100	When the relative size of deltarpm metadata vs pkgs is larger than this, deltarpm metadata is not downloaded from the repo. Note that you can give values over `100`, so `200` means that the metadata is required to be half the size of the packages. Use `0` to turn off this check, and always download metadata.
deltarpm_percentage	Default: 75	When the relative size of delta vs pkg is larger than this, delta is not used. Use `0` to turn off delta rpm processing. Local repositories (with file:// baseurl) have delta rpms turned off by default.
description		A human readable string describing the repository. This option corresponds to the "name" property in the repo file. This parameter is only required if state is set to `present`.
enabled bool	Choices: no yes ←	This tells yum whether or not use this repository.
enablegroups bool	Choices: no yes ←	Determines whether yum will allow the use of package groups for this repository.
exclude		List of packages to exclude from updates or installs. This should be a space separated list. Shell globs using wildcards (eg. `*` and `?`) are allowed. The list can also be a regular YAML array.
failovermethod	Choices: roundrobin ← priority	`roundrobin` randomly selects a URL out of the list of URLs to start with and proceeds through each of them as it encounters a failure contacting the host. `priority` starts from the first baseurl listed and reads through them sequentially.
file		File name without the `.repo` extension to save the repo in. Defaults to the value of name.
gpgcakey		A URL pointing to the ASCII-armored CA key file for the repository.
gpgcheck bool	Choices: no yes	Tells yum whether or not it should perform a GPG signature check on packages. No default setting. If the value is not set, the system setting from `/etc/yum.conf` or system default of `no` will be used.
gpgkey		A URL pointing to the ASCII-armored GPG key file for the repository. It can also be a list of multiple URLs.
group		Name of the group that should own the file/directory, as would be fed to chown.
http_caching	Choices: all ← packages none	Determines how upstream HTTP caches are instructed to handle any HTTP downloads that Yum does. `all` means that all HTTP downloads should be cached. `packages` means that only RPM package downloads should be cached (but not repository metadata downloads). `none` means that no HTTP downloads should be cached.
include		Include external configuration file. Both, local path and URL is supported. Configuration file will be inserted at the position of the include= line. Included files may contain further include lines. Yum will abort with an error if an inclusion loop is detected.
includepkgs		List of packages you want to only use from a repository. This should be a space separated list. Shell globs using wildcards (eg. `*` and `?`) are allowed. Substitution variables (e.g. `$releasever`) are honored here. The list can also be a regular YAML array.
ip_resolve	Choices: 4 6 IPv4 IPv6 whatever ←	Determines how yum resolves host names. `4` or `IPv4` - resolve to IPv4 addresses only. `6` or `IPv6` - resolve to IPv6 addresses only.
keepalive bool	Choices: no ← yes	This tells yum whether or not HTTP/1.1 keepalive should be used with this repository. This can improve transfer speeds by using one connection when downloading multiple files from a repository.
keepcache	Choices: 0 1 ←	Either `1` or `0`. Determines whether or not yum keeps the cache of headers and packages after successful installation.
metadata_expire	Default: 21600	Time (in seconds) after which the metadata will expire. Default value is 6 hours.
metadata_expire_filter	Choices: never read-only:past read-only:present ← read-only:future	Filter the metadata_expire time, allowing a trade of speed for accuracy if a command doesn't require it. Each yum command can specify that it requires a certain level of timeliness quality from the remote repos. from "I'm about to install/upgrade, so this better be current" to "Anything that's available is good enough". `never` - Nothing is filtered, always obey metadata_expire. `read-only:past` - Commands that only care about past information are filtered from metadata expiring. Eg. yum history info (if history needs to lookup anything about a previous transaction, then by definition the remote package was available in the past). `read-only:present` - Commands that are balanced between past and future. Eg. yum list yum. `read-only:future` - Commands that are likely to result in running other commands which will require the latest metadata. Eg. yum check-update. Note that this option does not override "yum clean expire-cache".
metalink		Specifies a URL to a metalink file for the repomd.xml, a list of mirrors for the entire repository are generated by converting the mirrors for the repomd.xml file to a baseurl. This, the baseurl or mirrorlist parameters are required if state is set to `present`.
mirrorlist		Specifies a URL to a file containing a list of baseurls. This, the baseurl or metalink parameters are required if state is set to `present`.
mirrorlist_expire	Default: 21600	Time (in seconds) after which the mirrorlist locally cached will expire. Default value is 6 hours.
mode		Mode the file or directory should be. For those used to /usr/bin/chmod remember that modes are actually octal numbers. You must either add a leading zero so that Ansible's YAML parser knows it is an octal number (like `0644` or `01777`) or quote it (like `'644'` or `'1777'`) so Ansible receives a string and can do its own conversion from string into number. Giving Ansible a number without following one of these rules will end up with a decimal number which will have unexpected results. As of version 1.8, the mode may be specified as a symbolic mode (for example, `u+rwx` or `u=rw,g=r,o=r`).
name required		Unique repository ID. This option builds the section name of the repository in the repo file. This parameter is only required if state is set to `present` or `absent`.
owner		Name of the user that should own the file/directory, as would be fed to chown.
password		Password to use with the username for basic authentication.
priority	Default: 99	Enforce ordered protection of repositories. The value is an integer from 1 to 99. This option only works if the YUM Priorities plugin is installed.
protect bool	Choices: no ← yes	Protect packages from updates from other repositories.
proxy		URL to the proxy server that yum should use. Set to `_none_` to disable the global proxy setting.
proxy_password		Username to use for proxy.
proxy_username		Password for this proxy.
repo_gpgcheck bool	Choices: no ← yes	This tells yum whether or not it should perform a GPG signature check on the repodata from this repository.
reposdir	Default: /etc/yum.repos.d	Directory where the `.repo` files will be stored.
retries	Default: 10	Set the number of times any attempt to retrieve a file should retry before returning an error. Setting this to `0` makes yum try forever.
s3_enabled bool	Choices: no ← yes	Enables support for S3 repositories. This option only works if the YUM S3 plugin is installed.
selevel	Default: s0	Level part of the SELinux file context. This is the MLS/MCS attribute, sometimes known as the `range`. `_default` feature works as for seuser.
serole		Role part of SELinux file context, `_default` feature works as for seuser.
setype		Type part of SELinux file context, `_default` feature works as for seuser.
seuser		User part of SELinux file context. Will default to system policy, if applicable. If set to `_default`, it will use the `user` portion of the policy if available.
skip_if_unavailable bool	Choices: no ← yes	If set to `yes` yum will continue running if this repository cannot be contacted for any reason. This should be set carefully as all repos are consulted for any given command.
ssl_check_cert_permissions bool	Choices: no ← yes	Whether yum should check the permissions on the paths for the certificates on the repository (both remote and local). If we can't read any of the files then yum will force skip_if_unavailable to be `yes`. This is most useful for non-root processes which use yum on repos that have client cert files which are readable only by root.
sslcacert		Path to the directory containing the databases of the certificate authorities yum should use to verify SSL certificates.
sslclientcert		Path to the SSL client certificate yum should use to connect to repos/remote sites.
sslclientkey		Path to the SSL client key yum should use to connect to repos/remote sites.
sslverify bool	Choices: no yes ←	Defines whether yum should verify SSL certificates/hosts at all.
state	Choices: absent present ←	State of the repo file.
throttle		Enable bandwidth throttling for downloads. This option can be expressed as a absolute data rate in bytes/sec. An SI prefix (k, M or G) may be appended to the bandwidth value.
timeout	Default: 30	Number of seconds to wait for a connection before timing out.
ui_repoid_vars	Default: releasever basearch	When a repository id is displayed, append these yum variables to the string if they are used in the baseurl/etc. Variables are appended in the order listed (and found).
unsafe_writes bool (added in 2.2)	Choices: no ← yes	By default this module uses atomic operations to prevent data corruption or inconsistent reads from the target files, but sometimes systems are configured or just broken in ways that prevent this. One example is docker mounted files, which cannot be updated atomically from inside the container and can only be written in an unsafe manner. This option allows Ansible to fall back to unsafe methods of updating files when atomic operations fail (however, it doesn't force Ansible to perform unsafe writes). IMPORTANT! Unsafe writes are subject to race conditions and can lead to data corruption.
username		Username to use for basic authentication to a repo or really any url.

Notes ¶

Note

All comments will be removed if modifying an existing repo file.
Section order is preserved in an existing repo file.
Parameters in a section are ordered alphabetically in an existing repo file.
The repo file will be automatically deleted if it contains no repository.
When removing a repository, beware that the metadata cache may still remain on disk until you run yum clean all. Use a notification handler for this.
The params parameter was removed in Ansible 2.5 due to circumventing Ansible’s parameter handling

Examples ¶

- name: Add repository
  yum_repository:
    name: epel
    description: EPEL YUM repo
    baseurl: https://download.fedoraproject.org/pub/epel/$releasever/$basearch/

- name: Add multiple repositories into the same file (1/2)
  yum_repository:
    name: epel
    description: EPEL YUM repo
    file: external_repos
    baseurl: https://download.fedoraproject.org/pub/epel/$releasever/$basearch/
    gpgcheck: no

- name: Add multiple repositories into the same file (2/2)
  yum_repository:
    name: rpmforge
    description: RPMforge YUM repo
    file: external_repos
    baseurl: http://apt.sw.be/redhat/el7/en/$basearch/rpmforge
    mirrorlist: http://mirrorlist.repoforge.org/el7/mirrors-rpmforge
    enabled: no

# Handler showing how to clean yum metadata cache
- name: yum-clean-metadata
  command: yum clean metadata
  args:
    warn: no

# Example removing a repository and cleaning up metadata cache
- name: Remove repository (and clean up left-over metadata)
  yum_repository:
    name: epel
    state: absent
  notify: yum-clean-metadata

- name: Remove repository from a specific repo file
  yum_repository:
    name: epel
    file: external_repos
    state: absent

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
repo string	success	repository name Sample: epel
state string	success	state of the target, after execution Sample: present

Status ¶

This module is flagged as stableinterface which means that the maintainers for this module guarantee that no backward incompatible interface changes will be made.

Maintenance ¶

This module is flagged as core which means that it is maintained by the Ansible Core Team. See Module Maintenance & Support for more info.

For a list of other modules that are also maintained by the Ansible Core Team, see here.

Support ¶

For more information about Red Hat’s support of this module, please refer to this Knowledge Base article

Author ¶

Jiri Tyr (@jtyr)

Hint

If you notice any issues in this documentation you can edit this document to improve it.