bigip_gtm_datacenter - Manage Datacenter configuration in BIG-IP¶

New in version 2.2.

Synopsis
- Requirements
Parameters
Notes
Examples
Return Values
Status
Maintenance
- Author

Synopsis ¶

Manage BIG-IP data center configuration. A data center defines the location where the physical network components reside, such as the server and link objects that share the same subnet on the network. This module is able to manipulate the data center definitions in a BIG-IP.

Requirements ¶

The below requirements are needed on the host that executes this module.

f5-sdk >= 3.0.16

Parameters ¶

Parameter		Choices/Defaults	Comments
contact			The name of the contact for the data center.
description			The description of the data center.
location			The location of the data center.
name required			The name of the data center.
partition (added in 2.5)		Default: Common	Device partition to manage resources on.
password required			The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
provider (added in 2.5)		Default: None	A dict object containing connection details.
	ssh_keyfile		Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable `ANSIBLE_NET_SSH_KEYFILE`.
	timeout	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	server required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	user required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	server_port	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	password required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	validate_certs bool	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
	transport required	Choices: rest cli ←	Configures the transport connection to use when connecting to the remote device.
server required			The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
server_port (added in 2.2)		Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
state		Choices: present ← absent enabled disabled	The virtual address state. If `absent`, an attempt to delete the virtual address will be made. This will only succeed if this virtual address is not in use by a virtual server. `present` creates the virtual address and enables it. If `enabled`, enable the virtual address if it exists. If `disabled`, create the virtual address if needed, and set state to `disabled`.
user required			The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
validate_certs bool (added in 2.0)		Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.

Notes ¶

Note

For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires the f5-sdk Python package on the host. This is as easy as pip install f5-sdk.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples ¶

- name: Create data center "New York"
  bigip_gtm_datacenter:
    server: lb.mydomain.com
    user: admin
    password: secret
    name: New York
    location: 222 West 23rd
  delegate_to: localhost

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
contact string	changed	The contact that was set on the datacenter. Sample: [email protected]
description string	changed	The description that was set for the datacenter. Sample: Datacenter in NYC
disabled bool	changed	Whether the datacenter is disabled or not. Sample: True
enabled bool	changed	Whether the datacenter is enabled or not Sample: True
location string	changed	The location that is set for the datacenter. Sample: 222 West 23rd
state string	changed	State of the datacenter. Sample: disabled

Status ¶

This module is flagged as stableinterface which means that the maintainers for this module guarantee that no backward incompatible interface changes will be made.

Maintenance ¶

This module is flagged as certified which means that it is maintained by an Ansible Partner. See Module Maintenance & Support for more info.

For a list of other modules that are also maintained by an Ansible Partner, see here.

Author ¶

Tim Rupp (@caphrim007)

Hint

If you notice any issues in this documentation you can edit this document to improve it.