nmcli - Manage Networking

New in version 2.0.

Synopsis

Requirements

The below requirements are needed on the host that executes this module.

  • nmcli
  • dbus
  • NetworkManager-glib

Parameters

Parameter Choices/Defaults Comments
ageingtime Default:
300
This is only used with bridge - [ageing-time <0-1000000>] the Ethernet MAC address aging time, in seconds
arp_interval
This is only used with bond - ARP interval
arp_ip_target
This is only used with bond - ARP IP target
autoconnect
bool
    Choices:
  • no
  • yes ←
Whether the connection should start on boot.
Whether the connection profile can be automatically activated
conn_name
required
Where conn_name will be the name used to call the connection. when not provided a default name is generated: <type>[-<ifname>][-<num>]
dhcp_client_id
(added in 2.5)
DHCP Client Identifier sent to the DHCP server.
dns4
A list of upto 3 dns servers, ipv4 format e.g. To add two IPv4 DNS server addresses: "192.0.2.53 198.51.100.53"
dns4_search
(added in 2.5)
A list of DNS search domains.
dns6
A list of upto 3 dns servers, ipv6 format e.g. To add two IPv6 DNS server addresses: "2001:4860:4860::8888 2001:4860:4860::8844"
dns6_search
(added in 2.5)
A list of DNS search domains.
downdelay
This is only used with bond - downdelay
egress
This is only used with VLAN - VLAN egress priority mapping
flags
This is only used with VLAN - flags
forwarddelay Default:
15
This is only used with bridge - [forward-delay <2-30>] STP forwarding delay, in seconds
gw4
The IPv4 gateway for this interface using this format ie: "192.0.2.1"
gw6
The IPv6 gateway for this interface using this format ie: "2001:db8::1"
hairpin
bool
    Choices:
  • no
  • yes ←
This is only used with 'bridge-slave' - 'hairpin mode' for the slave, which allows frames to be sent back out through the slave the frame was received on.
hellotime Default:
2
This is only used with bridge - [hello-time <1-10>] STP hello time, in seconds
ifname Default:
conn_name
Where IFNAME will be the what we call the interface name.
interface to bind the connection to. The connection will only be applicable to this interface name.
A special value of "*" can be used for interface-independent connections.
The ifname argument is mandatory for all connection types except bond, team, bridge and vlan.
ingress
This is only used with VLAN - VLAN ingress priority mapping
ip4
The IPv4 address to this interface using this format ie: "192.0.2.24/24"
ip6
The IPv6 address to this interface using this format ie: "abbe::cafe"
mac
This is only used with bridge - MAC address of the bridge (note: this requires a recent kernel feature, originally introduced in 3.15 upstream kernel)
master
master <master (ifname, or connection UUID or conn_name) of bridge, team, bond master connection profile.
maxage Default:
20
This is only used with bridge - [max-age <6-42>] STP maximum message age, in seconds
miimon Default:
100
This is only used with bond - miimon
mode
    Choices:
  • balance-rr ←
  • active-backup
  • balance-xor
  • broadcast
  • 802.3ad
  • balance-tlb
  • balance-alb
This is the type of device or network connection that you wish to create for a bond, team or bridge.
mtu Default:
1500
The connection MTU, e.g. 9000. This can't be applied when creating the interface and is done once the interface has been created.
Can be used when modifying Team, VLAN, Ethernet (Future plans to implement wifi, pppoe, infiniband)
path_cost Default:
100
This is only used with 'bridge-slave' - [<1-65535>] - STP port cost for destinations via this slave
primary
This is only used with bond and is the primary interface name (for "active-backup" mode), this is the usually the 'ifname'
priority Default:
128
This is only used with 'bridge' - sets STP priority
slavepriority Default:
32
This is only used with 'bridge-slave' - [<0-63>] - STP priority of this slave
state
required
    Choices:
  • present
  • absent
Whether the device should exist or not, taking action if the state is different from what is stated.
stp
bool
    Choices:
  • no
  • yes
This is only used with bridge and controls whether Spanning Tree Protocol (STP) is enabled for this bridge
type
    Choices:
  • ethernet
  • team
  • team-slave
  • bond
  • bond-slave
  • bridge
  • bridge-slave
  • vlan
  • generic
This is the type of device or network connection that you wish to create or modify.
type generic is added in version 2.5.
updelay
This is only used with bond - updelay
vlandev
This is only used with VLAN - parent device this VLAN is on, can use ifname
vlanid
This is only used with VLAN - VLAN ID in range <0-4095>

Examples

# These examples are using the following inventory:
#
# ## Directory layout:
#
# |_/inventory/cloud-hosts
# |           /group_vars/openstack-stage.yml
# |           /host_vars/controller-01.openstack.host.com
# |           /host_vars/controller-02.openstack.host.com
# |_/playbook/library/nmcli.py
# |          /playbook-add.yml
# |          /playbook-del.yml
# ```
#
# ## inventory examples
# ### groups_vars
# ```yml
# ---
# #devops_os_define_network
# storage_gw: "192.0.2.254"
# external_gw: "198.51.100.254"
# tenant_gw: "203.0.113.254"
#
# #Team vars
# nmcli_team:
#   - conn_name: tenant
#     ip4: '{{ tenant_ip }}'
#     gw4: '{{ tenant_gw }}'
#   - conn_name: external
#     ip4: '{{ external_ip }}'
#     gw4: '{{ external_gw }}'
#   - conn_name: storage
#     ip4: '{{ storage_ip }}'
#     gw4: '{{ storage_gw }}'
# nmcli_team_slave:
#   - conn_name: em1
#     ifname: em1
#     master: tenant
#   - conn_name: em2
#     ifname: em2
#     master: tenant
#   - conn_name: p2p1
#     ifname: p2p1
#     master: storage
#   - conn_name: p2p2
#     ifname: p2p2
#     master: external
#
# #bond vars
# nmcli_bond:
#   - conn_name: tenant
#     ip4: '{{ tenant_ip }}'
#     gw4: ''
#     mode: balance-rr
#   - conn_name: external
#     ip4: '{{ external_ip }}'
#     gw4: ''
#     mode: balance-rr
#   - conn_name: storage
#     ip4: '{{ storage_ip }}'
#     gw4: '{{ storage_gw }}'
#     mode: balance-rr
# nmcli_bond_slave:
#   - conn_name: em1
#     ifname: em1
#     master: tenant
#   - conn_name: em2
#     ifname: em2
#     master: tenant
#   - conn_name: p2p1
#     ifname: p2p1
#     master: storage
#   - conn_name: p2p2
#     ifname: p2p2
#     master: external
#
# #ethernet vars
# nmcli_ethernet:
#   - conn_name: em1
#     ifname: em1
#     ip4: '{{ tenant_ip }}'
#     gw4: '{{ tenant_gw }}'
#   - conn_name: em2
#     ifname: em2
#     ip4: '{{ tenant_ip1 }}'
#     gw4: '{{ tenant_gw }}'
#   - conn_name: p2p1
#     ifname: p2p1
#     ip4: '{{ storage_ip }}'
#     gw4: '{{ storage_gw }}'
#   - conn_name: p2p2
#     ifname: p2p2
#     ip4: '{{ external_ip }}'
#     gw4: '{{ external_gw }}'
# ```
#
# ### host_vars
# ```yml
# ---
# storage_ip: "192.0.2.91/23"
# external_ip: "198.51.100.23/21"
# tenant_ip: "203.0.113.77/23"
# ```



## playbook-add.yml example

---
- hosts: openstack-stage
  remote_user: root
  tasks:

  - name: install needed network manager libs
    yum:
      name: '{{ item }}'
      state: installed
    with_items:
      - NetworkManager-glib
      - libnm-qt-devel.x86_64
      - nm-connection-editor.x86_64
      - libsemanage-python
      - policycoreutils-python

##### Working with all cloud nodes - Teaming
  - name: try nmcli add team - conn_name only & ip4 gw4
    nmcli:
      type: team
      conn_name: '{{ item.conn_name }}'
      ip4: '{{ item.ip4 }}'
      gw4: '{{ item.gw4 }}'
      state: present
    with_items:
      - '{{ nmcli_team }}'

  - name: try nmcli add teams-slave
    nmcli:
      type: team-slave
      conn_name: '{{ item.conn_name }}'
      ifname: '{{ item.ifname }}'
      master: '{{ item.master }}'
      state: present
    with_items:
      - '{{ nmcli_team_slave }}'

###### Working with all cloud nodes - Bonding
  - name: try nmcli add bond - conn_name only & ip4 gw4 mode
    nmcli:
      type: bond
      conn_name: '{{ item.conn_name }}'
      ip4: '{{ item.ip4 }}'
      gw4: '{{ item.gw4 }}'
      mode: '{{ item.mode }}'
      state: present
    with_items:
      - '{{ nmcli_bond }}'

  - name: try nmcli add bond-slave
    nmcli:
      type: bond-slave
      conn_name: '{{ item.conn_name }}'
      ifname: '{{ item.ifname }}'
      master: '{{ item.master }}'
      state: present
    with_items:
      - '{{ nmcli_bond_slave }}'

##### Working with all cloud nodes - Ethernet
  - name: nmcli add Ethernet - conn_name only & ip4 gw4
    nmcli:
      type: ethernet
      conn_name: '{{ item.conn_name }}'
      ip4: '{{ item.ip4 }}'
      gw4: '{{ item.gw4 }}'
      state: present
    with_items:
      - '{{ nmcli_ethernet }}'

## playbook-del.yml example
- hosts: openstack-stage
  remote_user: root
  tasks:

  - name: try nmcli del team - multiple
    nmcli:
      conn_name: '{{ item.conn_name }}'
      state: absent
    with_items:
      - conn_name: em1
      - conn_name: em2
      - conn_name: p1p1
      - conn_name: p1p2
      - conn_name: p2p1
      - conn_name: p2p2
      - conn_name: tenant
      - conn_name: storage
      - conn_name: external
      - conn_name: team-em1
      - conn_name: team-em2
      - conn_name: team-p1p1
      - conn_name: team-p1p2
      - conn_name: team-p2p1
      - conn_name: team-p2p2

# To add an Ethernet connection with static IP configuration, issue a command as follows
  - nmcli:
    conn_name: my-eth1
    ifname: eth1
    type: ethernet
    ip4: 192.0.2.100/24
    gw4: 192.0.2.1
    state: present

# To add an Team connection with static IP configuration, issue a command as follows
  - nmcli:
      conn_name: my-team1
      ifname: my-team1
      type: team
      ip4: 192.0.2.100/24
      gw4: 192.0.2.1
      state: present
      autoconnect: yes

# Optionally, at the same time specify IPv6 addresses for the device as follows:
  - nmcli:
      conn_name: my-eth1
      ifname: eth1
      type: ethernet
      ip4: 192.0.2.100/24
      gw4: 192.0.2.1
      ip6: '2001:db8::cafe'
      gw6: '2001:db8::1'
      state: present

# To add two IPv4 DNS server addresses:
  - nmcli:
      conn_name: my-eth1
      type: ethernet
      dns4:
        - 192.0.2.53
        - 198.51.100.53
      state: present

# To make a profile usable for all compatible Ethernet interfaces, issue a command as follows
  - nmcli:
      ctype: ethernet
      name: my-eth1
      ifname: '*'
      state: present

# To change the property of a setting e.g. MTU, issue a command as follows:
  - nmcli:
      conn_name: my-eth1
      mtu: 9000
      type: ethernet
      state: present

# nmcli exits with status 0 if it succeeds and exits with a status greater
# than zero when there is a failure. The following list of status codes may be
# returned:
#
#     - 0 Success - indicates the operation succeeded
#     - 1 Unknown or unspecified error
#     - 2 Invalid user input, wrong nmcli invocation
#     - 3 Timeout expired (see --wait option)
#     - 4 Connection activation failed
#     - 5 Connection deactivation failed
#     - 6 Disconnecting device failed
#     - 7 Connection deletion failed
#     - 8 NetworkManager is not running
#     - 9 nmcli and NetworkManager versions mismatch
#     - 10 Connection, device, or access point does not exist.

Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Maintenance

This module is flagged as community which means that it is maintained by the Ansible Community. See Module Maintenance & Support for more info.

For a list of other modules that are also maintained by the Ansible Community, see here.

Author

  • Chris Long (@alcamie101)

Hint

If you notice any issues in this documentation you can edit this document to improve it.