cnos_image - Perform firmware upgrade/download from a remote server on devices running Lenovo CNOS

New in version 2.3.

Synopsis

Parameters

Parameter Choices/Defaults Comments
deviceType
required

(added in 2.3)
    Choices:
  • g8272_cnos
  • g8296_cnos
  • g8332_cnos
  • NE1072T
  • NE1032
  • NE1032T
  • NE10032
  • NE2572
This specifies the type of device where the method is executed. The choices NE1072T,NE1032,NE1032T,NE10032,NE2572 are added since version 2.4.
enablePassword
(added in 2.3)
Configures the password used to enter Global Configuration command mode on the switch. If the switch does not request this password, the parameter is ignored.While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.
host
required

(added in 2.3)
This is the variable used to search the hosts file at /etc/ansible/hosts and identify the IP address of the device on which the template is going to be applied. Usually the Ansible keyword {{ inventory_hostname }} is specified in the playbook as an abstraction of the group of network elements that need to be configured.
imgpath
required
This specifies the full file path of the image located on the remote server. In case the relative path is used as the variable value, the root folder for the user of the server needs to be specified.
imgtype
required
    Choices:
  • all
  • boot
  • os
  • onie
This specifies the firmware image type to be downloaded
outputfile
required

(added in 2.3)
This specifies the file path where the output of each command execution is saved. Each command that is specified in the merged template file and each response from the device are saved here. Usually the location is the results folder, but you can choose another location based on your write permission.
password
required

(added in 2.3)
Configures the password used to authenticate the connection to the remote device. The value of the password parameter is used to authenticate the SSH session. While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.
protocol
required
    Choices:
  • SFTP
  • SCP
  • FTP
  • TFTP
This refers to the protocol used by the network device to interact with the remote server from where to download the firmware image. The choices are FTP, SFTP, TFTP, or SCP. Any other protocols will result in error. If this parameter is not specified there is no default value to be used.
serverip
required
This specifies the IP Address of the remote server from where the software image will be downloaded.
serverpassword
Specify the password for the server relating to the protocol used
serverusername
required
Specify the username for the server relating to the protocol used
username
required

(added in 2.3)
Configures the username used to authenticate the connection to the remote device. The value of the username parameter is used to authenticate the SSH session. While generally the value should come from the inventory file, you can also specify it as a variable. This parameter is optional. If it is not specified, no default value will be used.

Notes

Note

Examples

Tasks : The following are examples of using the module cnos_image. These are
  written in the main.yml file of the tasks directory.
---
- name: Test Image transfer
  cnos_image:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType'] }}"
      outputfile: "./results/test_image_{{ inventory_hostname }}_output.txt"
      protocol: "sftp"
      serverip: "10.241.106.118"
      imgpath: "/root/cnos_images/G8272-10.1.0.112.img"
      imgtype: "os"
      serverusername: "root"
      serverpassword: "root123"

- name: Test Image tftp
  cnos_image:
      deviceType: "{{ hostvars[inventory_hostname]['deviceType'] }}"
      outputfile: "./results/test_image_{{ inventory_hostname }}_output.txt"
      protocol: "tftp"
      serverip: "10.241.106.118"
      imgpath: "/anil/G8272-10.2.0.34.img"
      imgtype: "os"
      serverusername: "root"
      serverpassword: "root123"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
msg
string
always
Success or failure message

Sample:
Image file tranferred to device


Status

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Maintenance

This module is flagged as community which means that it is maintained by the Ansible Community. See Module Maintenance & Support for more info.

For a list of other modules that are also maintained by the Ansible Community, see here.

Author

  • Anil Kumar Muraleedharan (@amuraleedhar)

Hint

If you notice any issues in this documentation you can edit this document to improve it.