bigip_software_install - Install software images on a BIG-IP¶

New in version 2.7.

Synopsis
- Requirements
Parameters
Notes
Examples
Status
Maintenance
- Author

Synopsis ¶

Install new images on a BIG-IP.

Requirements ¶

The below requirements are needed on the host that executes this module.

f5-sdk >= 3.0.16

Parameters ¶

Parameter		Choices/Defaults	Comments
image			Image to install on the remote device.
password required			The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
provider (added in 2.5)		Default: None	A dict object containing connection details.
	ssh_keyfile		Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports. You may omit this option by setting the environment variable `ANSIBLE_NET_SSH_KEYFILE`.
	timeout	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
	server required		The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
	user required		The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
	server_port	Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
	password required		The password for the user account used to connect to the BIG-IP. You may omit this option by setting the environment variable `F5_PASSWORD`. aliases: pass, pwd
	validate_certs bool	Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
	transport required	Choices: rest cli ←	Configures the transport connection to use when connecting to the remote device.
server required			The BIG-IP host. You may omit this option by setting the environment variable `F5_SERVER`.
server_port (added in 2.2)		Default: 443	The BIG-IP server port. You may omit this option by setting the environment variable `F5_SERVER_PORT`.
state		Choices: activated ← installed	When `installed`, ensures that the software is installed on the volume and the volume is set to be booted from. The device is not rebooted into the new software. When `activated`, performs the same operation as `installed`, but the system is rebooted to the new software.
user required			The username to connect to the BIG-IP with. This user must have administrative privileges on the device. You may omit this option by setting the environment variable `F5_USER`.
validate_certs bool (added in 2.0)		Choices: no yes ←	If `no`, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates. You may omit this option by setting the environment variable `F5_VALIDATE_CERTS`.
volume			The volume to install the software image to.

Notes ¶

Note

For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
Requires the f5-sdk Python package on the host. This is as easy as pip install f5-sdk.
Requires BIG-IP software version >= 12.
The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples ¶

- name: Ensure an existing image is installed in specified volume
  bigip_software_install:
    image: BIGIP-13.0.0.0.0.1645.iso
    volume: HD1.2
    state: installed
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Ensure an existing image is activated in specified volume
  bigip_software_install:
    image: BIGIP-13.0.0.0.0.1645.iso
    state: activated
    volume: HD1.2
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Status ¶

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Maintenance ¶

This module is flagged as certified which means that it is maintained by an Ansible Partner. See Module Maintenance & Support for more info.

For a list of other modules that are also maintained by an Ansible Partner, see here.

Author ¶

Tim Rupp (@caphrim007)

Hint

If you notice any issues in this documentation you can edit this document to improve it.