nxos_gir_profile_management - Create a maintenance-mode or normal-mode profile for GIR.¶

New in version 2.2.

Synopsis
Parameters
Notes
Examples
Return Values
Status
Maintenance
- Support
- Author

Synopsis ¶

Manage a maintenance-mode or normal-mode profile with configuration commands that can be applied during graceful removal or graceful insertion.

Parameters ¶

Parameter		Choices/Defaults	Comments
commands			List of commands to be included into the profile.
mode required		Choices: maintenance normal	Configure the profile as Maintenance or Normal mode.
provider			Deprecated Starting with Ansible 2.5 we recommend using `connection: network_cli`. This option is only required if you are using NX-API. For more information please see the NXOS Platform Options guide. A dict object containing connection details.
	username		Configures the username to use to authenticate the connection to the remote device. This value is used to authenticate either the CLI login or the nxapi authentication depending on which transport is used. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_USERNAME` will be used instead.
	authorize bool (added in 2.5.3)	Choices: no ← yes	Instructs the module to enter privileged mode on the remote device before sending any commands. If not specified, the device will attempt to execute all commands in non-privileged mode. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTHORIZE` will be used instead.
	ssh_keyfile		Specifies the SSH key to use to authenticate the connection to the remote device. This argument is only used for the cli transport. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_SSH_KEYFILE` will be used instead.
	use_proxy bool (added in 2.5)	Choices: no yes ←	If `no`, the environment variables `http_proxy` and `https_proxy` will be ignored.
	auth_pass (added in 2.5.3)	Default: none	Specifies the password to use if required to enter privileged mode on the remote device. If authorize is false, then this argument does nothing. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_AUTH_PASS` will be used instead.
	host required		Specifies the DNS host name or address for connecting to the remote device over the specified transport. The value of host is used as the destination address for the transport.
	timeout (added in 2.3)	Default: 10	Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error. NX-API can be slow to return on long-running commands (sh mac, sh bgp, etc).
	use_ssl bool	Choices: no ← yes	Configures the transport to use SSL if set to true only when the `transport=nxapi`, otherwise this value is ignored.
	password		Specifies the password to use to authenticate the connection to the remote device. This is a common argument used for either cli or nxapi transports. If the value is not specified in the task, the value of environment variable `ANSIBLE_NET_PASSWORD` will be used instead.
	validate_certs bool	Choices: no yes	If `no`, SSL certificates will not be validated. This should only be used on personally controlled sites using self-signed certificates. If the transport argument is not nxapi, this value is ignored.
	port	Default: 0 (use common port)	Specifies the port to use when building the connection to the remote device. This value applies to either cli or nxapi. The port value will default to the appropriate transport common port if none is provided in the task. (cli=22, http=80, https=443).
	transport required	Default: cli	Configures the transport connection to use when connecting to the remote device. The transport argument supports connectivity to the device over cli (ssh) or nxapi.
state		Choices: present ← absent	Specify desired state of the resource.

Notes ¶

Note

Tested against NXOSv 7.3.(0)D1(1) on VIRL
state=absent removes the whole profile.
For information on using CLI and NX-API see the NXOS Platform Options guide
For more information on using Ansible to manage network devices see the Ansible Network Guide
For more information on using Ansible to manage Cisco devices see the Cisco integration page.

Examples ¶

# Create a maintenance-mode profile
- nxos_gir_profile_management:
    mode: maintenance
    commands:
      - router eigrp 11
      - isolate

# Remove the maintenance-mode profile
- nxos_gir_profile_management:
    mode: maintenance
    state: absent

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key	Returned	Description
changed boolean	always	check to see if a change was made on the device Sample: True
end_state list	verbose mode	list of profile entries after module execution. Sample: ['router bgp 65535', 'isolate', 'router eigrp 10', 'isolate', 'diagnostic bootup level complete', 'router eigrp 11', 'isolate']
existing list	verbose mode	list of existing profile commands. Sample: ['router bgp 65535', 'isolate', 'router eigrp 10', 'isolate', 'diagnostic bootup level complete']
proposed list	verbose mode	list of commands passed into module. Sample: ['router eigrp 11', 'isolate']
updates list	always	commands sent to the device Sample: ['configure maintenance profile maintenance-mode', 'router eigrp 11', 'isolate']

Status ¶

This module is flagged as preview which means that it is not guaranteed to have a backwards compatible interface.

Maintenance ¶

This module is flagged as network which means that it is maintained by the Ansible Network Team. See Module Maintenance & Support for more info.

For a list of other modules that are also maintained by the Ansible Network Team, see here.

Support ¶

For more information about Red Hat’s support of this module, please refer to this Knowledge Base article

Author ¶

Gabriele Gerbino (@GGabriele)

Hint

If you notice any issues in this documentation you can edit this document to improve it.