ec2_vpc_nacl - create and delete Network ACLs.

New in version 2.2.

Synopsis

Requirements

The below requirements are needed on the host that executes this module.

  • boto
  • boto3
  • botocore
  • json
  • python >= 2.6

Parameters

Parameter Choices/Defaults Comments
aws_access_key
AWS access key. If not set then the value of the AWS_ACCESS_KEY_ID, AWS_ACCESS_KEY or EC2_ACCESS_KEY environment variable is used.

aliases: ec2_access_key, access_key
aws_secret_key
AWS secret key. If not set then the value of the AWS_SECRET_ACCESS_KEY, AWS_SECRET_KEY, or EC2_SECRET_KEY environment variable is used.

aliases: ec2_secret_key, secret_key
ec2_url
Url to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used.
egress Default:
[]
A list of rules for outgoing traffic. Each rule must be specified as a list. Each rule may contain the rule number (integer 1-32766), protocol (one of ['tcp', 'udp', 'icmp', '-1', 'all']), the rule action ('allow' or 'deny') the CIDR of the IPv4 network range to allow or deny, the ICMP type (-1 means all types), the ICMP code (-1 means all codes), the last port in the range for TCP or UDP protocols, and the first port in the range for TCP or UDP protocols. See examples.
ingress Default:
[]
List of rules for incoming traffic. Each rule must be specified as a list. Each rule may contain the rule number (integer 1-32766), protocol (one of ['tcp', 'udp', 'icmp', '-1', 'all']), the rule action ('allow' or 'deny') the CIDR of the IPv4 network range to allow or deny, the ICMP type (-1 means all types), the ICMP code (-1 means all codes), the last port in the range for TCP or UDP protocols, and the first port in the range for TCP or UDP protocols. See examples.
nacl_id
(added in 2.4)
NACL id identifying a network ACL.
One and only one of the name or nacl_id is required.
name
Tagged name identifying a network ACL.
One and only one of the name or nacl_id is required.
profile
(added in 1.6)
Uses a boto profile. Only works with boto >= 2.24.0.
region
The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region

aliases: aws_region, ec2_region
security_token
(added in 1.6)
AWS STS security token. If not set then the value of the AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN environment variable is used.

aliases: access_token
state
    Choices:
  • present ←
  • absent
Creates or modifies an existing NACL
Deletes a NACL and reassociates subnets to the default NACL
subnets
The list of subnets that should be associated with the network ACL.
Must be specified as a list
Each subnet can be specified as subnet ID, or its tagged name.
tags
Dictionary of tags to look for and apply when creating a network ACL.
validate_certs
bool

(added in 1.5)
    Choices:
  • no
  • yes ←
When set to "no", SSL certificates will not be validated for boto versions >= 2.6.0.
vpc_id
VPC id of the requesting VPC.
Required when state present.

Notes

Note

  • If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence AWS_URL or EC2_URL, AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY or EC2_ACCESS_KEY, AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY or EC2_SECRET_KEY, AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN, AWS_REGION or EC2_REGION
  • Ansible uses the boto configuration file (typically ~/.boto) if no credentials are provided. See https://boto.readthedocs.io/en/latest/boto_config_tut.html
  • AWS_REGION or EC2_REGION can be typically be used to specify the AWS region, when required, but this can also be configured in the boto config file

Examples

# Complete example to create and delete a network ACL
# that allows SSH, HTTP and ICMP in, and all traffic out.
- name: "Create and associate production DMZ network ACL with DMZ subnets"
  ec2_vpc_nacl:
    vpc_id: vpc-12345678
    name: prod-dmz-nacl
    region: ap-southeast-2
    subnets: ['prod-dmz-1', 'prod-dmz-2']
    tags:
      CostCode: CC1234
      Project: phoenix
      Description: production DMZ
    ingress:
        # rule no, protocol, allow/deny, cidr, icmp_type, icmp_code,
        #                                             port from, port to
        - [100, 'tcp', 'allow', '0.0.0.0/0', null, null, 22, 22]
        - [200, 'tcp', 'allow', '0.0.0.0/0', null, null, 80, 80]
        - [300, 'icmp', 'allow', '0.0.0.0/0', 0, 8]
    egress:
        - [100, 'all', 'allow', '0.0.0.0/0', null, null, null, null]
    state: 'present'

- name: "Remove the ingress and egress rules - defaults to deny all"
  ec2_vpc_nacl:
    vpc_id: vpc-12345678
    name: prod-dmz-nacl
    region: ap-southeast-2
    subnets:
      - prod-dmz-1
      - prod-dmz-2
    tags:
      CostCode: CC1234
      Project: phoenix
      Description: production DMZ
    state: present

- name: "Remove the NACL subnet associations and tags"
  ec2_vpc_nacl:
    vpc_id: 'vpc-12345678'
    name: prod-dmz-nacl
    region: ap-southeast-2
    state: present

- name: "Delete nacl and subnet associations"
  ec2_vpc_nacl:
    vpc_id: vpc-12345678
    name: prod-dmz-nacl
    state: absent

- name: "Delete nacl by its id"
  ec2_vpc_nacl:
    nacl_id: acl-33b4ee5b
    state: absent

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
task
dictionary
success
The result of the create, or delete action.



Status

This module is flagged as stableinterface which means that the maintainers for this module guarantee that no backward incompatible interface changes will be made.

Maintenance

This module is flagged as certified which means that it is maintained by an Ansible Partner. See Module Maintenance & Support for more info.

For a list of other modules that are also maintained by an Ansible Partner, see here.

Author

  • Mike Mochan (@mmochan)

Hint

If you notice any issues in this documentation you can edit this document to improve it.